-
Replacement for Type 8 Oil and Gas Rubber Bellow SealMaterials: According to customer's demands. Size: 12-100mm. Pressure: ≦10Mpa. linear velocity:≤25m/s. Temperature: -0°C-160°C.
-
208 Mechanical Seal Replacement for Pump with Low PressureShaft Diameter: 12–80 mmWorking Pressure: ≤1.6 MPaWorking Temperature: -20°C to 180°C (depending on elastomer material)Speed: ≤ 15 m/sApplicable Media: Clean water, hot water, mineral oil,
-
John Crane 112 Replacement Unbalanced mechanical sealSize: 20-120mm. Pressure: ≤ 1.2MPa. linear velocity: ≤ 15m/s. Temperature: -20~180℃.
-
Equivalent to type 2 mechanical sealMaterials: According to customer's demands. Size: 20-120mm. Pressure:≤1.4 Mpa. linear velocity:≤15m/s. Temperature:-20°C - 120°C.
-
Equivalent to M32 sewage pump mechanical sealMaterials: According to customer's demands. Size: 8-100mm. Pressure: ≤1.0Mpa. linear velocity:≤15m/s. Temperature:-20℃~200℃. Mediums: oil, water, amorphism acid, alkali, salt, and organic solvents..
-
MOR m7n mechanical sealMaterials: According to customer's demands. Size: 14-200mm. Pressure: ≤2.5Mpa. linear velocity:≤20m/s. Temperature: -20~220(℃). Mediums: oil, water, acid, alkali, organic solvents and subjects that
-
MOR Flygt 4560 Pump Mechanical SealMaterials: According to customer's demands. Size: Standard or customized. Pressure: ≤1.6Mpa. Linear speed: ≤10m/s. Temperature: -20℃~180℃. Sewage pump, slurry pump, submersible pump, submersible
-
212 Multi Spring Balanced Teflon Bellow Mechanical SealMaterials: According to customer's demands. Size: 45mm. Pressure: ≤0.8MPa. linear velocity: ≤15m/s. Temperature: -40°C~180°C.
-
MOR MG1 MB1 109 Mechanical SealMaterials: According to customer's demands. Size: 10~110 mm. Pressure: ≤1.0 MPa. linear velocity: ≤10m/s. Temperature: - 20 ~ 120 ºC. Mediums: oil, water, sewage, food and beverage, paper pulp and
-
MOR 527 compressor mechanical sealMaterials: According to customer's demands. Size: 18 mm to 120 mm. Pressure: ≤0.8 MPa. linear velocity: ≤15 m/s. Temperature: -20°C to 200°C (-4°F to 392°F). Mediums: oil, water, amorphism acid,
-
MOR MG13 Rubber Bellow Mechanical SealMaterials: According to customer's demands. Size: Standard or customized. Pressure:≤1. 2MPa. linear velocity: ≤10m/s. Temperature: -20°C to +120°C.
-
MOR 2100 Sewage Water Pump Spring SealMaterials: According to customer's demands. Size:10-100mm. Pressure: ≤ 1.2 MPa. linear velocity: ≤10m/s. Temperature:-20°C to +200°C. Mediums: oil, water, sewage, food and beverage, paper pulp and
Single and dual seal. Elastomer bellows rotating. Balanced. Independent of direction of rotation. No torsion on bellows and spring. Conical or cylindrical spring. Metric and inch sizes available....
SB/C1A – Rubber Bellow Seal; Features. Bi-directional seal; Balanced seal design; Available with Lug-drive saves bellow from torsional forces; Easy to install; Tailor-made to fit existing stuffing...
Also, the rubber bellow seal has a role in preventing the wear of shafts or other parts and can significantly extend their lifespan. They are used for a large number of different applications, in...
These seals are used in chemical industries for keeping extremely corrosive & critical substances like concentrated acids, alkalies and salts. Our offered range of bellow seals is known for corrosion...
Suitable for tight spaces, these highly compressible bellows have sealed seams to keep contaminants out. Breathable Round Bellows with Cuff Ends Sewn seams let these bellows...
The Rubber Bellow Mechanical Seal Equivalent To MG1 is a simple kind of seal that works in a method of containing fluid present in a vessel, which can be typically a pump or a mixer. The mechanical...
