-
MOR BQFDR cartridge mechanical sealShaft Diameter: 24 mm – 100 mm (1.000” – 4.000”)Working Pressure: Up to 2.5 MPaWorking Temperature: -40 °C ~ +300 °C (dependent on elastomer)Rotating Speed: Up to 25 m/sTemperature: 0~200°C.
-
MOR 604 High Temperature Metal Bellow Mechanical SealSize: 25–100 mm (custom sizes available). Pressure: 0–2.5 MPa (higher on request). linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (depends on bellows material).
-
Equivalent To MFL85N Metal Bellow Mechanical SealSize: 16-100mm. Pressure:- 0.1 ~ 2.5 MPa. linear velocity: ≤20m/s. Temperature: - 40 ~ 220 ºC. Mediums: hot water, oil, liquid hydrocarbon, acid, alkali, solvents, paper pulp and other
-
MOR MFL95N Metal Bellow Mechanical SealSize: 14 mm to 100 mm. Pressure: ≤1.6Mpa. linear velocity: ≤20m/s. Temperature: -40°C to +220°C.
-
MOR 102 Booster Pump Metal Bellow Mechanical SealSize: 16-100mm. Pressure:- 0.1 ~ 2.5 MPa. linear velocity: ≤15m/s. Temperature: - 40 ~ 200 ºC. Mediums: hot water, oil, liquid hydrocarbon, acid, alkali, solvents, paper pulp and other
-
Equivalent to Flowserve Durametallic X-200 Metal Bellows Mechanical SealSize: 25 mm – 150 mm (1 – 6). Pressure:Up to 41 bar (600 psi) (single seal); up to 27 bar (400 psi) (dual seal). linear velocity: ≤30m/s. Temperature: -200°C to +425°C (-328°F to +800°F)
-
MOR BXHHB BXH API mechanical sealSize: 21.8-127mm. Temperature: -73°C- 427°C. Pressure: ≤20.7 bar. Speed: ≤25 mps.
-
MOR MFLWT 80 Rotating Mechanical SealSize: 38~127mm(custom sizes available). Pressure: ≤25bar. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material-dependent).
-
MOR LBG Cartridge Metal Bellow SealSize: 25~100mm. Pressure: ≤2.5MPa. Linear velocity: ≤6000r/m. Temperature: -70°C to 400°CThis seal is mainly used for coal-fired power generation boiler feed water pump.
-
MOR EBU metal bellow mechanical sealSize: 25 mm – 100 mm (1 – 4). Pressure: ≤25bar. linear velocity: ≤50m/s. Temperature: -40°C to +425°C (-40°F to +800°F) (material‑dependent).
-
MOR 609 bellows shaft sealSize: 25–100 mm (custom sizes available). Pressure: 0-2.5MPa. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material‑dependent).
-
MOR DWB1 DWB2 Liquid Natural Gas Low Temperature Special Materials Mechanical Face SealMaterials: According to customer's demands. Size: Standard or customized. Pressure: ≤1 MPa. linear velocity: ≤8000 r/m. Temperature: -196°C to 100°C (-321°F to 212°F).
Cartridge mechanical seals are composite units that contain sleeve, seal and gland plate. It is a ready-to-use, built-in assembly that doesn’t need any fitting further. It overcomes the fitting...
Mechanical Seals Pump Seals Standard Cartridge Standard Cartridge John Crane offers a wide range of standard cartridge seals that are versatile and easy to install, suit a wide range of duties and...
Flexaseal provides expert mechanical seal repair for all major brands in our Gulf Coast repair location and the Vermont manufacturing facility. Search. Since 1983. ... including the development of...
Scenic is the best known mechanical seal company in East Asia Taiwan. We offer high quality mechanical seals in a wide range of types. 01 About Scenic. 02 Industries. ... Mechanical seal. Single...
The Easiest seal to install as a replacement for pump packing is a cartridge type mechanical seal: The Beauty of cartridge seals are they are self-contained. Holding all the elements of a mechanical...
About Us All information . TNG Seal designing and manufacturing Mechanical Seals Since 1982. Offering the widest range of standard mechanical seal from any compnay anywhere.TNG Seal developed...
