-
MOR LC900/1150II Mechanical Seal (For FGD Slurry Circulation Pumps)Size: Up to 250 mm (compatible with LC900/1150 pumps). Pressure: ≤1.6MPa. Temperature: ≤250℃. Speed≤ 15 m/s
-
MOR Stern Tube SealMOR Marine Stern Tube Air Seal for a marine stern tube air seal system, which is a critical part of the stern shaft sealing assembly for large oil-lubricated propeller shafts. It prevents seawater
-
MOR HRM Mechancial SealSize: 25–120 mm (custom sizes available). Pressure: 0–2.5 MPa (higher pressures on request). Temperature: −50 °C to +425 °C (material-dependent). Speed: ≤ 25 m/s
-
MOR JCS2A Pharmaceutical Centrifugal Pump SealsSize: 30–120 mm (custom sizes available). Pressure: 0–2.5 MPa (process); up to 1.5 MPa (barrier fluid). linear velocity: ≤20m/s. Temperature: -20 °C to +180 °C (standard); -40 °C to +220 °C (special
-
MOR SV Series Cartridge Mechanical Seal (For Side-Entry Agitator)Size: 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / custom mm size. Pressure: ≤ 1.6 MPa. linear velocity: ≤15 m/s. Temperature: -20 ℃ ~ +180 ℃ (depending on O-ring material). Mediums: oil, acid, alkali, and polymer
-
CURC glass lined reactor mechanical sealSize: 20 mm – 100 mm (custom sizes available). Pressure: ≤1.6MPA. linear velocity: ≤20m/s. Temperature: -20 °C to +180 °C (depends on elastomer material).
-
MOR H75N mechanical seal in reactorMaterials: According to customer's demands. Size: 25~160mm. Pressure: ≤1.0MPa. linear velocity: ≤2m/s. Temperature: -20°C to 200°C (-4°F to 392°F).
-
MOR GB-SECCOMIX-11 Mechanical SealMaterials: According to customer's demands. Size: 25~160mm. Pressure: ≤10bar. linear velocity: ≤2m/s. Temperature: -20°C to 200°C (-4°F to 392°F).
-
MOR 8B1D reactor double mechanical sealMaterials: According to customer's demands. Size: 25-220mm or customized. Pressure: ≤5.0MPa. linear velocity: ≤30m/s. Temperature: -20~220 ºC.
-
MOR 155 Single Cartridge Mechanical Seal for Circulating PumpSize: 25 mm – 120 mm (1.0 – 4.75)Pressure: ≤2.5MpaSpeed: ≤16m/sTemperature: -20°C to +220°C (-4°F to +428°F) (elastomer‑dependent)
-
MOR HTM Multi Spring Mechanical SealSize: 20-120mm. Pressure: ≤4MPa. Temperature: −40°C to 220°C. Linear Speed: ≤25m/s.
-
MOR Cartex universal mechanical sealSize: 25–100 mm (1.0–4.0 in); custom sizes available. Pressure: ≤2.0MPa. linear velocity: ≤ 10 m/s (standard); up to 23 m/s for high‑speed variants. Temperature: -40°C to +220°C (-40°F to 428°F).
10 of the mechanical seal Shaft/shaft sleeve diameters are always three-digit numbers beneath the stationary seat for types U and B Seal face Stationary seat Secondary seals Spring Other metal parts...
Our CS3 conical spring mechanical seal with O-ring on the rotating and stationary part has interchangeable sealing faces. It consists of an unbalanced seal with a dependent rotation direction....
Jul 22, 2024 · Discover key factors to consider when choosing conical spring mechanical seals, including material compatibility, pressure limits, and...
The multiple spring seals require less axial length to provide the required face closing forces, allowing for shorter seal working length designs. Unlike larger single spring designs, they exhibit...
Mechanical Spring Force. The Bal Spring® canted coil spring exhibits a unique deflection and force behavior when it’s compressed. Unlike typical spring technologies, our spring exerts a near-constant...
Sep 25, 2023 · Single Spring Mechanical Seal. Design and Functioning: Single spring mechanical seals are characterized by their simplicity. They consist of a single coil spring that exerts pressure...
