-
Equivalent to type 2 mechanical sealMaterials: According to customer's demands. Size: 20-120mm. Pressure:≤1.4 Mpa. linear velocity:≤15m/s. Temperature:-20°C - 120°C.
-
MOR 105 Chemical Mechanical Seal for Caustic PumpShaft diameter: 12 mm – 80 mmPressure: ≤ 1.0 MPa (10 bar)Temperature: −20°C to 180°CSpeed: ≤ 15 m/sTemperature:-20-180℃.
-
MOR 58U 59U Mechanical Seal for Centrifugal PumpSize: 14-100mm. Pressure: ≤ 1.7 MPa (17 bar). linear velocity: ≤25 m/s. Temperature: - 50 ~ 400 ºC.
-
MOR 2 high temperature mechanical sealMaterials: According to customer's demands. Size: 10-120mm. Pressure:≤ 10bar. linear velocity:≤ 10m/s. Temperature:-30°C- 200°C.
-
MOR SEV High Speed Mechanical Seal for Waste Water PumpMaterials: According to customer's demands. Size: 10-100mm. Pressure:≤ 1.2Mpa. linear velocity:≤ 10m/s. Temperature:-30°C - 200°C.
-
Equivalent to M32 sewage pump mechanical sealMaterials: According to customer's demands. Size: 8-100mm. Pressure: ≤1.0Mpa. linear velocity:≤15m/s. Temperature:-20℃~200℃. Mediums: oil, water, amorphism acid, alkali, salt, and organic solvents..
-
Replacement for Type 8 Oil and Gas Rubber Bellow SealMaterials: According to customer's demands. Size: 12-100mm. Pressure: ≦10Mpa. linear velocity:≤25m/s. Temperature: -0°C-160°C.
-
MOR m7n mechanical sealMaterials: According to customer's demands. Size: 14-200mm. Pressure: ≤2.5Mpa. linear velocity:≤20m/s. Temperature: -20~220(℃). Mediums: oil, water, acid, alkali, organic solvents and subjects that
-
MOR Flygt 4560 Pump Mechanical SealMaterials: According to customer's demands. Size: Standard or customized. Pressure: ≤1.6Mpa. Linear speed: ≤10m/s. Temperature: -20℃~180℃. Sewage pump, slurry pump, submersible pump, submersible
-
MOR MG1 MB1 109 Mechanical SealMaterials: According to customer's demands. Size: 10~110 mm. Pressure: ≤1.0 MPa. linear velocity: ≤10m/s. Temperature: - 20 ~ 120 ºC. Mediums: oil, water, sewage, food and beverage, paper pulp and
-
MOR Wilo High Pressure Pump Mechanical SealMaterials: According to customer's demands. Size: 35 mm to 75mm. Pressure: ≤12bar. linear velocity: ≤10 m/s. Temperature: -40℃~200℃. Mediums: water and weak corrosion liquids..
-
MOR 2100 Sewage Water Pump Spring SealMaterials: According to customer's demands. Size:10-100mm. Pressure: ≤ 1.2 MPa. linear velocity: ≤10m/s. Temperature:-20°C to +200°C. Mediums: oil, water, sewage, food and beverage, paper pulp and
The Three Types of Mechanical Seals. Three types of mechanical seals are used in process equipment: Cartridge; Component; Air; A cartridge-mounted, end-face mechanical seal is a completely...
ASP Type 2 Mechanical Seals are ideal for use in most rotating shaft applications. The rotating head has been lowered into the spring coils to accomidate shorter stuffing boxes. They...
39 rows · ASP Type 2 Mechanical Seal. The ASP Type 2 mechanical seal was designed to shorten the working length of the Type 1 seal. It is slightly wider with a shorter working length spring. It does...
Type A & B: provides a seal at the shaft. Type C, D & E:provides a seal at the shaft surface and a friction-drive connection between the shaft and seal assembly. Spring Retainer -Positions and...
3 rows · Product Description Type 2. John Crane Type 2 Elastomer Bellows Seals are specified in ......
Type 2. Standard Type 2 Mechanical Seals. (John Crane equivalent) heavier duty than Type 21, can withstand higher pressures and speeds. wider and shorter than Type 1. Rotating Seal Face: Carbon....
