-
Equivalent To C8B / C8U,8B / 8B1 Cartridge Type Mechanical SealSize: 20 mm – 120 mm (0.79 – 4.72). Pressure: ≤6.5 MPa. Temperature: −40°C to 220°C (−40°F to 428°F) (material dependent). Linear speed: ≤25m/s.
-
MOR 48LP mechanical sealShaft Diameter: 20 mm – 120 mm (0.787” – 4.724”)Working Pressure: Up to 3.0 MPaWorking Temperature: -20 °C ~ +220 °C (dependent on elastomer material)Rotating Speed: Up to 3800 r/minTemperature:
-
MOR Stern Tube SealMOR Marine Stern Tube Air Seal for a marine stern tube air seal system, which is a critical part of the stern shaft sealing assembly for large oil-lubricated propeller shafts. It prevents seawater
-
MOR 122 Double Cartridge Mechanical SealPressure Range : 0~4 MPaTemperature Range : -60~260 °CLinear Speed : 0~7000 r/minShaft Diameter : 22~280 mm
-
MOR CK267 double mechanical seal for reactorMaterials: According to customer's demands. Size: 30 mm to 100 mm. Pressure: 0 ~ 40 bar. linear velocity: 20m/s. Temperature: - 20 ~ 250 C°. Mediums: oil & chemical industry.
-
MOR H75N mechanical seal in reactorMaterials: According to customer's demands. Size: 25~160mm. Pressure: ≤1.0MPa. linear velocity: ≤2m/s. Temperature: -20°C to 200°C (-4°F to 392°F).
-
MOR CDPN Dual Pressurized Mechanical SealSize: 24 mm – 85 mm (1.0 – 3.5); larger sizes available as CDP. Pressure: Vacuum to 2.5 MPa (25 bar); barrier fluid pressure: +0.1–0.3 MPa over process pressure. linear velocity: 20m/s.
-
MOR 318 Single Cartridge Mechanical SealSize: 20 mm – 100 mm or customized. Pressure: <1.6Mpa. linear velocity:<20m/s. Temperature:−20°C to 200°C.
-
MOR SE2 cartridge type mechanical seal partsSize: 30 mm to 100 mm. Pressure: 0 ~ 20 bar. linear velocity: 30m/s. Temperature: -20°C to 180°C (356°F).
-
MOR SAF High Pressure Mechanical SealSize: 25 mm – 120 mm. Pressure : up to 10.0 MPa (100 bar) or higher. Linear velocity: ≤25m/s. Temperature: - 40 ~ 250 ºC.
-
MOR JCS1C Single Acting Hydraulic Cylinder SealSize: 30~100mm. Pressure: 0 ~ 2.0 MPa. linear velocity: ≤20 m/s. Temperature: - 20 ~ 180 ºC.
-
MOR CSSN cartridge type sealSize: 24 mm – 150 mm (1 – 6). Pressure: ≤ 2Mpa. Linear velocity: ≤ 20 m/s. Temperature: -40°C to +220°C (material‑dependent).
Overview of Cartridge Type Mechanical Seal, A single cartridge type mechanical seal consists of two very flat surfaces that are pressed together by a spring and slide against each other. The single...
b) Conventional Seals: These seals types require setting and alignment of the seal (single, double, tandem) on the shaft or sleeve of the pump. The emphasis is on reducing maintenance costs, as the...
Good quality cartridge type mechanical seal from cartridge type mechanical seal manufacturer, Buy cartridge type mechanical seal online from China. Tel: Request A Quote. English English French German...
The Easiest seal to install as a replacement for pump packing is a cartridge type mechanical seal: The Beauty of cartridge seals are they are self-contained. Holding all the elements of a mechanical...
Universal Cartridge™ Seal Family — Single Cartridge Elastomer Bellows Seal The Type 5611 mechanical seal is the first truly universal cartridge seal — and its modular family concept will...
We are proudly American designers, manufacturers, and installers of commercial sauna and steam rooms. Am-Finn is proud to be the oldest and largest American Manufacturer of Sauna and Steam Rooms and...
