Application scope of dry gas seals

Oct 06, 2024

Leave a message

‌Dry gas seals have a wide range of applications, mainly including the following equipment and application scenarios:

‌Compressors‌: Dry gas seals were first used on the shaft ends of compressors. According to their structure, they are mainly divided into single-end, double-end and tandem dry gas seals. Single-end dry gas seals are suitable for medium and low pressure conditions, allowing a small amount of process gas to leak into the environment; double-end dry gas seals are suitable for working conditions where process gas is not allowed to leak into the atmosphere but a small amount of sealing gas is allowed to leak into the machine; tandem dry gas seals are suitable for working conditions where a small amount of medium gas leaking into the atmosphere is allowed.

‌Pumps‌: Dry gas seals are also widely used in pumps, especially in large centrifugal compressor shaft seals under high-speed and high-pressure conditions. Due to its non-contact design, dry gas seals are particularly suitable as shaft seals under high-speed and high-pressure conditions, which can effectively prevent medium leakage and contamination, and improve the operating efficiency and safety of the equipment.

‌Stirring kettles‌: Dry gas seals are also used in equipment such as stirring kettles. The specific structure and application are similar to those of compressors and pumps, mainly depending on their usage scenarios and process requirements.

‌Other equipment‌: Dry gas seals are also suitable for pipelines, offshore platforms, refineries, petrochemical industries, etc., and are suitable for any system that transports gas. Due to its non-contact design, dry gas seals are particularly suitable for use under high-speed and high-pressure conditions, and the required gas control system is much simpler than the oil system of oil film seals‌.

Send Inquiry