The working principle of seal support system mainly includes the following aspects:
Working principle of mechanical seal: Mechanical seal relies on elastic elements to provide elastic force to overcome the friction between the auxiliary seal ring of compensation ring and the shaft, so that the compensation ring fits tightly on the end face of non-compensation ring, forming the initial closing force of the sealing end face. When the main engine is filled with pressure medium and starts working, the sealing end face will generate closing force, so that the sealing end face reaches a reasonable pressure ratio and realizes the sealing of fluid. Mechanical seals are commonly used in rotary fluid machinery such as pumps, compressors, and reaction stirring kettles, and are also used for sealing of gearboxes, ship tail shafts, etc.

Working principle of reciprocating seal: The reciprocating sealing system is mainly composed of hydraulic cylinder, piston rod and sealing ring. When the piston rod and the hydraulic cylinder are relatively stationary, the oil in the hydraulic cylinder can be sealed in the cylinder body by the sealing ring; when the piston rod reciprocates relative to the hydraulic cylinder, the oil in the hydraulic cylinder forms a thin oil film in the sealing interface with the movement of the piston rod, and is brought out of the cylinder body by the piston rod, forming leakage. Reciprocating seals mainly include O-rings, Y-rings and U-rings, and their failure forms include aging, wear, extrusion and corrosion.
Working principle of turbine shaft seal system: The shaft end seal of the turbine usually adopts a self-sealing system. When the unit is operating normally, the leakage steam of the high and medium pressure cylinder shaft end seals is cooled by water spraying and used as steam supply for the low pressure shaft end seal. When the unit is started or running at low load, the steam supply for the seal is provided by external steam. The system can automatically switch from startup to full load operation, and has the characteristics of simplicity, safety, reliability and good adaptability to working conditions.
