-
MOR 58U 59U Mechanical Seal for Centrifugal PumpSize: 14-100mm. Pressure: ≤ 1.7 MPa (17 bar). linear velocity: ≤25 m/s. Temperature: - 50 ~ 400 ºC.
-
208 Mechanical Seal Replacement for Pump with Low PressureShaft Diameter: 12–80 mmWorking Pressure: ≤1.6 MPaWorking Temperature: -20°C to 180°C (depending on elastomer material)Speed: ≤ 15 m/sApplicable Media: Clean water, hot water, mineral oil,
-
EMG1 Elastomer Bellows Mechanical SealProducts Description The eMG1 is a single-face rotating elastomer bellows mechanical seal engineered as a direct drop-in replacement for traditional MG1 seals. Standard dimensional compliance enables
-
Equivalent to M32 sewage pump mechanical sealMaterials: According to customer's demands. Size: 8-100mm. Pressure: ≤1.0Mpa. linear velocity:≤15m/s. Temperature:-20℃~200℃. Mediums: oil, water, amorphism acid, alkali, salt, and organic solvents..
-
MOR m7n mechanical sealMaterials: According to customer's demands. Size: 14-200mm. Pressure: ≤2.5Mpa. linear velocity:≤20m/s. Temperature: -20~220(℃). Mediums: oil, water, acid, alkali, organic solvents and subjects that
-
MOR WB2 10T 10R PTFE Elastomer Bellow Mechanical SealMaterials: According to customer's demands. Size: 20-80mm. Pressure: ≤0.8MPa. linear velocity: ≤10m/s. Temperature: -20~120℃.
-
212 Multi Spring Balanced Teflon Bellow Mechanical SealMaterials: According to customer's demands. Size: 45mm. Pressure: ≤0.8MPa. linear velocity: ≤15m/s. Temperature: -40°C~180°C.
-
MOR 527 compressor mechanical sealMaterials: According to customer's demands. Size: 18 mm to 120 mm. Pressure: ≤0.8 MPa. linear velocity: ≤15 m/s. Temperature: -20°C to 200°C (-4°F to 392°F). Mediums: oil, water, amorphism acid,
-
MOR MG13 Rubber Bellow Mechanical SealMaterials: According to customer's demands. Size: Standard or customized. Pressure:≤1. 2MPa. linear velocity: ≤10m/s. Temperature: -20°C to +120°C.
-
Equivalent to John Crane Type 21 Single Marine Mechanical Seal for Sewage PumpType: Mechanical seal for sewage pumpMaterials: According to customer's demandsSize: 14-100mmPressure: ≤0.8 Mpalinear velocity: ≤10m/sTemperature: - 20 ~ 120 ºC
-
MOR 2100 Sewage Water Pump Spring SealMaterials: According to customer's demands. Size:10-100mm. Pressure: ≤ 1.2 MPa. linear velocity: ≤10m/s. Temperature:-20°C to +200°C. Mediums: oil, water, sewage, food and beverage, paper pulp and
-
HJ92N Mechanical Seal Replacement for PumpMaterials: According to customer's demands. Size:18-100mm . Pressure: ≤ 25pa. linear velocity: ≤15m/s. Temperature:-20℃~180℃.
N13 (type 58U) O-ring Mechanical Seal Analog: John Crane Type 58U O-ring Mechanical Seal Performance Capabilities Temperature: -40C to 200C dependent on the elastomer Pressure: Up to 10 bar Speed: Up...
Our products widely used in KSB pumps, Grundfos pumps, Flowserve pumps, etc. And our mechanical seal can exactly replace original mechanical seal in sharpe agitator, ekato agitator, lightnin...
YL 58U, 58B, 59B, and 59U Mechanical Seals for Chemical Centrifugal Pumps, Vacuum Pumps, Compressors and Reaction Kettles. Structural Features: single end, multiple springs, unbalanced (58U and 59U)...
Technical specifications for Type 57B/58B/58U Elastomer O-Ring Seals, including design, performance, and materials. Ideal for engineers....
Nov 21, 2023 · Replacement pump seal suitable for multistage pump, easy and convenient installation. The mechanical shaft seal is high pressure resistance, high temperature...
John Crane Type 58U O-ring Pusher Seals deliver maximum reliability and uptime. It is designed for general low to medium pressure duties in the processing, refinery and petrochemical industries....
