-
212 Multi Spring Balanced Teflon Bellow Mechanical SealMaterials: According to customer's demands. Size: 45mm. Pressure: ≤0.8MPa. linear velocity: ≤15m/s. Temperature: -40°C~180°C.
-
208 Mechanical Seal Replacement for Pump with Low PressureShaft Diameter: 12–80 mmWorking Pressure: ≤1.6 MPaWorking Temperature: -20°C to 180°C (depending on elastomer material)Speed: ≤ 15 m/sApplicable Media: Clean water, hot water, mineral oil,
-
EMG1 Elastomer Bellows Mechanical SealProducts Description The eMG1 is a single-face rotating elastomer bellows mechanical seal engineered as a direct drop-in replacement for traditional MG1 seals. Standard dimensional compliance enables
-
MOR 105 Chemical Mechanical Seal for Caustic PumpShaft diameter: 12 mm – 80 mmPressure: ≤ 1.0 MPa (10 bar)Temperature: −20°C to 180°CSpeed: ≤ 15 m/sTemperature:-20-180℃.
-
MOR 58U 59U Mechanical Seal for Centrifugal PumpSize: 14-100mm. Pressure: ≤ 1.7 MPa (17 bar). linear velocity: ≤25 m/s. Temperature: - 50 ~ 400 ºC.
-
224 Double Acting Mechanical Seal for Centrifugal PumpSize: 20-120mm. Pressure: ≤ 1.0 MPa (10 bar) (unbalanced, 224UU),≤ 2.0 MPa (20 bar) (balanced, 224TZ)Speed: ≤3000r/imin. Temperature:-20~+150℃.
-
MOR m7n mechanical sealMaterials: According to customer's demands. Size: 14-200mm. Pressure: ≤2.5Mpa. linear velocity:≤20m/s. Temperature: -20~220(℃). Mediums: oil, water, acid, alkali, organic solvents and subjects that
-
MOR WB2 10T 10R PTFE Elastomer Bellow Mechanical SealMaterials: According to customer's demands. Size: 20-80mm. Pressure: ≤0.8MPa. linear velocity: ≤10m/s. Temperature: -20~120℃.
-
MOR Flygt 4560 Pump Mechanical SealMaterials: According to customer's demands. Size: Standard or customized. Pressure: ≤1.6Mpa. Linear speed: ≤10m/s. Temperature: -20℃~180℃. Sewage pump, slurry pump, submersible pump, submersible
-
MOR 527 compressor mechanical sealMaterials: According to customer's demands. Size: 18 mm to 120 mm. Pressure: ≤0.8 MPa. linear velocity: ≤15 m/s. Temperature: -20°C to 200°C (-4°F to 392°F). Mediums: oil, water, amorphism acid,
-
MOR MG13 Rubber Bellow Mechanical SealMaterials: According to customer's demands. Size: Standard or customized. Pressure:≤1. 2MPa. linear velocity: ≤10m/s. Temperature: -20°C to +120°C.
-
HJ92N Mechanical Seal Replacement for PumpMaterials: According to customer's demands. Size:18-100mm . Pressure: ≤ 25pa. linear velocity: ≤15m/s. Temperature:-20℃~180℃.
TEFLON BELLOW SEALS- TB/TBR Equivalent to Eagle Burgmann Y 29, Johncrane 10/10T and Flowserve TB/TBR Features : • Out side Mounted Seals exclusively used for corrosive medium....
TEFLON BELLOWS MS-MB-14/MB-15 Mechanical Seal For Chemical Sentrifugal Pump, Vacuum Pump, Compressor and Reaction Kettes we are the manufacturers of PTFE Bellow which are...
Bellow Seals are used to close the inside of a pump from the outside world to prevent leakage.Bellow Mechanical seals provide a high degree of axial flexibility to compensate for...
Rotating outside mounted Teflon® bellows seal. Flexible Teflon® bellows takes more shaft run-outs. Independent of direction of rotation. Less number of parts in contact with media. Silicon...
Feb 03, 2021 · Teflon Bellow Mechanical Seals. (Type MS-TB10/TB10R) Teflon PTFE Bellow Seals are designed to handle highly corrosive liquids. PTFE...
The Teflon Bellow Mechanical Seal is a simple kind of seal that works in a method of containing fluid present in a vessel, which can be typically a pump or a mixer. The mechanical seal is designed in...
