-
MOR SE2 cartridge type mechanical seal partsSize: 30 mm to 100 mm. Pressure: 0 ~ 20 bar. linear velocity: 30m/s. Temperature: -20°C to 180°C (356°F).
-
MOR 523 LIGHTNIN Spring SealShaft size: 18–120 mm (standard)Pressure: ≤ 1.5 MPa (15 bar) / ≤ 3.0 MPa (30 bar)Temperature: 0–150 °C (standard) / −20–200 °C (high‑temp)Speed: ≤ 5 m/s (mixer) / ≤ 20 m/s (pump)
-
MOR 286HTSize: 25 mm – 610 mm (1.0 – 24) or customized. Pressure: 0~2MPa. linear velocity: ≤20r/m. Temperature: -40°C to 400°C (-40°F to 750°F).
-
MOR SV Series Cartridge Mechanical Seal (For Side-Entry Agitator)Size: 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / custom mm size. Pressure: ≤ 1.6 MPa. linear velocity: ≤15 m/s. Temperature: -20 ℃ ~ +180 ℃ (depending on O-ring material). Mediums: oil, acid, alkali, and polymer
-
MOR JCS1A Mechanical Seals for Centrifugal PumpsSize: 20 mm – 110 mm. Pressure: ≤ 1.6Mpa. linear velocity: ≤20m/s. Temperature: -20°C to +180°C (depending on elastomer material).
-
MOR LP-D Dual Cartridge Mechanical SealSize: 25 mm – 120 mm (1.0 – 4.75). Pressure: ≤ 4.0 MPa (40 bar). Linear velocity: ≤ 25 m/s. Temperature: - 40 ~ 250 ºC.
-
MOR SE2-AP Double Cartridge Mechanical SealSize: 25 mm – 110 mm. Pressure: 0 ~ 2.5 MPa. linear velocity: 20 m/s. Temperature: -40°C to +220°C.
-
MOR NLT-350/400AEF-300 Mechanical sealSize: 20-300mm. Pressure: ≤3.5MPa. Temperature: ≤280℃. Speed: ≤ 15 m/s.
-
MOR CSSN cartridge type sealSize: 24 mm – 150 mm (1 – 6). Pressure: ≤ 2Mpa. Linear velocity: ≤ 20 m/s. Temperature: -40°C to +220°C (material‑dependent).
-
MOR HTM Multi Spring Mechanical SealSize: 20-120mm. Pressure: ≤4MPa. Temperature: −40°C to 220°C. Linear Speed: ≤25m/s.
-
MOR Cartex universal mechanical sealSize: 25–100 mm (1.0–4.0 in); custom sizes available. Pressure: ≤2.0MPa. linear velocity: ≤ 10 m/s (standard); up to 23 m/s for high‑speed variants. Temperature: -40°C to +220°C (-40°F to 428°F).
-
MOR 522 EKATO Single-Acting Mechancial SealSize: 40-220mm. Pressure: ≤4 MPa. linear velocity: ≤15 m/s. Temperature: - 50 ~ 400 ºC.
Nov 17, 2023 · There are several types of mechanical seals, including cartridge-type, double and single seals. Therefore, we will explain in which case it is advisable to use each. Cartridge-type...
Cartridge Mechanical Seal. A cartridge seal is typically an enclosed type of seal system that has preassembled components. In a pre-assembly, you have a gland, sleeve, and other hardware components....
Cartridge type seals consist of three main components: the seal faces, stationary seat, and rotating assembly. The seal faces are made of materials that offer excellent wear resistance...
Cartridge mechanical seal construction is a proven reliability improvement. The seals are pre-assembled at the factory, pressure tested and shipped as a unit, leading to improved...
A cartridge-mounted, end-face mechanical seal is a self-contained unit that houses the sealing components—a gland, sleeve, and hardware. A cartridge seal allows the unit to be preassembled and preset...
The fully split cartridge mechanical seal assembly is comprised of two unitized self contained assemblies which fit together to form a unitized cartridge design. The assembly uses set screws to...
