-
MOR 604 High Temperature Metal Bellow Mechanical SealSize: 25–100 mm (custom sizes available). Pressure: 0–2.5 MPa (higher on request). linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (depends on bellows material).
-
MOR BQFDR cartridge mechanical sealShaft Diameter: 24 mm – 100 mm (1.000” – 4.000”)Working Pressure: Up to 2.5 MPaWorking Temperature: -40 °C ~ +300 °C (dependent on elastomer)Rotating Speed: Up to 25 m/sTemperature: 0~200°C.
-
Equivalent To MFL85N Metal Bellow Mechanical SealSize: 16-100mm. Pressure:- 0.1 ~ 2.5 MPa. linear velocity: ≤20m/s. Temperature: - 40 ~ 220 ºC. Mediums: hot water, oil, liquid hydrocarbon, acid, alkali, solvents, paper pulp and other
-
MOR MFL95N Metal Bellow Mechanical SealSize: 14 mm to 100 mm. Pressure: ≤1.6Mpa. linear velocity: ≤20m/s. Temperature: -40°C to +220°C.
-
MOR 102 Booster Pump Metal Bellow Mechanical SealSize: 16-100mm. Pressure:- 0.1 ~ 2.5 MPa. linear velocity: ≤15m/s. Temperature: - 40 ~ 200 ºC. Mediums: hot water, oil, liquid hydrocarbon, acid, alkali, solvents, paper pulp and other
-
Equivalent to Flowserve Durametallic X-200 Metal Bellows Mechanical SealSize: 25 mm – 150 mm (1 – 6). Pressure:Up to 41 bar (600 psi) (single seal); up to 27 bar (400 psi) (dual seal). linear velocity: ≤30m/s. Temperature: -200°C to +425°C (-328°F to +800°F)
-
MOR BXHHB BXH API mechanical sealSize: 21.8-127mm. Temperature: -73°C- 427°C. Pressure: ≤20.7 bar. Speed: ≤25 mps.
-
MOR MFLWT 80 Rotating Mechanical SealSize: 38~127mm(custom sizes available). Pressure: ≤25bar. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material-dependent).
-
MOR LBG Cartridge Metal Bellow SealSize: 25~100mm. Pressure: ≤2.5MPa. Linear velocity: ≤6000r/m. Temperature: -70°C to 400°CThis seal is mainly used for coal-fired power generation boiler feed water pump.
-
MOR EBU metal bellow mechanical sealSize: 25 mm – 100 mm (1 – 4). Pressure: ≤25bar. linear velocity: ≤50m/s. Temperature: -40°C to +425°C (-40°F to +800°F) (material‑dependent).
-
MOR 609 bellows shaft sealSize: 25–100 mm (custom sizes available). Pressure: 0-2.5MPa. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material‑dependent).
-
MOR CK267 double mechanical seal for reactorMaterials: According to customer's demands. Size: 30 mm to 100 mm. Pressure: 0 ~ 40 bar. linear velocity: 20m/s. Temperature: - 20 ~ 250 C°. Mediums: oil & chemical industry.
Metal Seal Face Basics Mechanical Face Seal Applications GOETZE® mechanical face seals are found wherever the going gets really tough: wheel hubs and axles, support and guide...
Metal face seals are designed for use in severe service conditions at relatively low speeds. They consist of two identical metal sealing rings and two cup springs made of nitrile or fluoro rubber...
Mechanical Face Seals are specifically engineered for rotating applications in extremely arduous environments where they withstand severe wear and...
This face seal is designed with a spring-energizer in a C-Seal jacket, which is a self-pressure, activated design to provide an effective metal-to-metal leak proof solution. The proper...
Both types consist of two identical metal seal rings mounted in two separate housings face-to-face on a lapped seal face. The metal rings are centered within their housings by an elastomer element....
SKF metal face seals type HDDF (fig 1) are designed for use under severe service conditions at relatively low circumferential speeds. They offer reliable protection against solid and liquid...
