-
MOR 58U 59U Mechanical Seal for Centrifugal PumpSize: 14-100mm. Pressure: ≤ 1.7 MPa (17 bar). linear velocity: ≤25 m/s. Temperature: - 50 ~ 400 ºC.
-
208 Mechanical Seal Replacement for Pump with Low PressureShaft Diameter: 12–80 mmWorking Pressure: ≤1.6 MPaWorking Temperature: -20°C to 180°C (depending on elastomer material)Speed: ≤ 15 m/sApplicable Media: Clean water, hot water, mineral oil,
-
EMG1 Elastomer Bellows Mechanical SealProducts Description The eMG1 is a single-face rotating elastomer bellows mechanical seal engineered as a direct drop-in replacement for traditional MG1 seals. Standard dimensional compliance enables
-
MOR 105 Chemical Mechanical Seal for Caustic PumpShaft diameter: 12 mm – 80 mmPressure: ≤ 1.0 MPa (10 bar)Temperature: −20°C to 180°CSpeed: ≤ 15 m/sTemperature:-20-180℃.
-
224 Double Acting Mechanical Seal for Centrifugal PumpSize: 20-120mm. Pressure: ≤ 1.0 MPa (10 bar) (unbalanced, 224UU),≤ 2.0 MPa (20 bar) (balanced, 224TZ)Speed: ≤3000r/imin. Temperature:-20~+150℃.
-
502 Replacement Single Spring Bellow Mechanical Seal for Petrochemical IndustrySize: 14-100mm. Pressure: ≤4Mpa. linear velocity: ≤13m/s. Temperature:-40°C to +205°C.
-
MOR Flygt 4560 Pump Mechanical SealMaterials: According to customer's demands. Size: Standard or customized. Pressure: ≤1.6Mpa. Linear speed: ≤10m/s. Temperature: -20℃~180℃. Sewage pump, slurry pump, submersible pump, submersible
-
212 Multi Spring Balanced Teflon Bellow Mechanical SealMaterials: According to customer's demands. Size: 45mm. Pressure: ≤0.8MPa. linear velocity: ≤15m/s. Temperature: -40°C~180°C.
-
MOR MG13 Rubber Bellow Mechanical SealMaterials: According to customer's demands. Size: Standard or customized. Pressure:≤1. 2MPa. linear velocity: ≤10m/s. Temperature: -20°C to +120°C.
-
MOR Wilo High Pressure Pump Mechanical SealMaterials: According to customer's demands. Size: 35 mm to 75mm. Pressure: ≤12bar. linear velocity: ≤10 m/s. Temperature: -40℃~200℃. Mediums: water and weak corrosion liquids..
-
Equivalent to John Crane Type 21 Single Marine Mechanical Seal for Sewage PumpType: Mechanical seal for sewage pumpMaterials: According to customer's demandsSize: 14-100mmPressure: ≤0.8 Mpalinear velocity: ≤10m/sTemperature: - 20 ~ 120 ºC
-
MOR 2100 Sewage Water Pump Spring SealMaterials: According to customer's demands. Size:10-100mm. Pressure: ≤ 1.2 MPa. linear velocity: ≤10m/s. Temperature:-20°C to +200°C. Mediums: oil, water, sewage, food and beverage, paper pulp and
Open the inlet and outlet valves to separate the pump. Take out the casing drain plug to empty any fluid in the pump. It will stop fluid leaks while taking apart the pump and mechanical seal. 3....
with the bearing housing. Remove the mechanical seal cover VDMA 471 with the cooling cover VDMA 165 and related O-Rings VDMA 412.2 and 412.3.Remove the stationary mechanical seal face VDMA 433.2 or...
The mechanical seal acts as a check valve and a slider bearing. The obvious function is that of a check valve to prevent liquid under pressure from leaking out of the pump; or from drawing air...
Apr 6, 2023 · Mechanical Seals are the popular choice for sealing the pump. With minimum maintenance and maximum durability, they detect leaks, control the sealing environment, and lubricate...
Apr 26, 2018 · The main purpose of the mechanical seal is to prevent leakage. They are a particularly important element of your pump because mechanical seal failure is responsible for a majority of...
Mechanical seals are essential components of centrifugal pump systems, playing a crucial role in preventing fluid leakage and ensuring reliable operation. They create a tight seal between the...
