-
MOR 522 EKATO Single-Acting Mechancial SealSize: 40-220mm. Pressure: ≤4 MPa. linear velocity: ≤15 m/s. Temperature: - 50 ~ 400 ºC.
-
MOR 48LP mechanical sealShaft Diameter: 20 mm – 120 mm (0.787” – 4.724”)Working Pressure: Up to 3.0 MPaWorking Temperature: -20 °C ~ +220 °C (dependent on elastomer material)Rotating Speed: Up to 3800 r/minTemperature:
-
MOR T.587-D/8B1D-SP-D Cartridge Mechanical SealThe MOR T.587-D/8B1D-SP-D cassette mechanical seal features a single-sided double-balance design; it is a specially customized variant derived from the General Motors 587-SP series. Advantages This
-
MOR 523 LIGHTNIN Spring SealShaft size: 18–120 mm (standard)Pressure: ≤ 1.5 MPa (15 bar) / ≤ 3.0 MPa (30 bar)Temperature: 0–150 °C (standard) / −20–200 °C (high‑temp)Speed: ≤ 5 m/s (mixer) / ≤ 20 m/s (pump)
-
MOR 528 balanced sealSize: 25 mm – 100 mm (custom sizes available). Pressure: ≤ 2.5 MPa (25 bar). linear velocity: ≤20m/s. Temperature: -40 °C to +220 °C (elastomer version) / up to 400 °C (metal bellows version).
-
MOR DWB1 DWB2 Liquid Natural Gas Low Temperature Special Materials Mechanical Face SealMaterials: According to customer's demands. Size: Standard or customized. Pressure: ≤1 MPa. linear velocity: ≤8000 r/m. Temperature: -196°C to 100°C (-321°F to 212°F).
-
MOR 8B1D reactor double mechanical sealMaterials: According to customer's demands. Size: 25-220mm or customized. Pressure: ≤5.0MPa. linear velocity: ≤30m/s. Temperature: -20~220 ºC.
-
MOR 318 Single Cartridge Mechanical SealSize: 20 mm – 100 mm or customized. Pressure: <1.6Mpa. linear velocity:<20m/s. Temperature:−20°C to 200°C.
-
MOR 155 Single Cartridge Mechanical Seal for Circulating PumpSize: 25 mm – 120 mm (1.0 – 4.75)Pressure: ≤2.5MpaSpeed: ≤16m/sTemperature: -20°C to +220°C (-4°F to +428°F) (elastomer‑dependent)
-
MOR SE2 cartridge type mechanical seal partsSize: 30 mm to 100 mm. Pressure: 0 ~ 20 bar. linear velocity: 30m/s. Temperature: -20°C to 180°C (356°F).
-
MOR LP-D Dual Cartridge Mechanical SealSize: 25 mm – 120 mm (1.0 – 4.75). Pressure: ≤ 4.0 MPa (40 bar). Linear velocity: ≤ 25 m/s. Temperature: - 40 ~ 250 ºC.
-
MOR NLT-350/400AEF-300 Mechanical sealSize: 20-300mm. Pressure: ≤3.5MPa. Temperature: ≤280℃. Speed: ≤ 15 m/s.
WebAdvanced sealing technology for the process industry. EKATO RMT provides a wide range of mechanical seals and supply systems, with it’s own brand ESD, in various industries:...
WebA single mechanical seal consists of two very flat surfaces that are pressed together by a spring and slide against each other. Between these two surfaces is a fluid film generated by the pumped...
WebAdvantages of Single Mechanical Seals. A single mechanical seal consists of stationary and rotating seal faces that are made from one hard and one softer...
WebMechanical Seals & Supply Systems. Single-Acting Mechanical Seals; Double-Acting Mechanical Seals; Triple-Acting Mechanical Seals; Hydraulic Components for Mechanical Seals; Automatic Seal Supply...
WebA single-acting piston seal is designed for cylinders where pressure is applied from one side only. The piston in single-acting cylinders may have oil on the pressure side only,...
WebSingle seal Independent of direction of rotation AGSR For top and side entry drives Double seal Balanced Stationary springs on product side Independent of direction of rotation...
