-
MOR SAF High Pressure Mechanical SealSize: 25 mm – 120 mm. Pressure : up to 10.0 MPa (100 bar) or higher. Linear velocity: ≤25m/s. Temperature: - 40 ~ 250 ºC.
-
MOR 122 Double Cartridge Mechanical SealPressure Range : 0~4 MPaTemperature Range : -60~260 °CLinear Speed : 0~7000 r/minShaft Diameter : 22~280 mm
-
MOR 5840 Cartridge Slurry SealShaft Diameter: 25 mm – 150 mm (0.984” – 5.906”)Working Pressure: Up to 4.0 MPaWorking Temperature: -30 °C ~ +250 °C (dependent on elastomer material)Rotating Speed: Up to 4200 r/minSeal Type:
-
MOR HRM Mechancial SealSize: 25–120 mm (custom sizes available). Pressure: 0–2.5 MPa (higher pressures on request). Temperature: −50 °C to +425 °C (material-dependent). Speed: ≤ 25 m/s
-
MOR 206 Vacuum Pump Mechanical SealSize:10-50mm. Pressure:Vacuum to 0.8 MPa. linear velocity: ≤12m/s. Temperature: -40℃~350℃.
-
MOR JCS2A Pharmaceutical Centrifugal Pump SealsSize: 30–120 mm (custom sizes available). Pressure: 0–2.5 MPa (process); up to 1.5 MPa (barrier fluid). linear velocity: ≤20m/s. Temperature: -20 °C to +180 °C (standard); -40 °C to +220 °C (special
-
MOR 8BIVORS Single Mechanical SealSize: 20 – 100 mm (Custom sizes available). Pressure: Vacuum to 1.6 MPa. linear velocity: ≤20m/s. Temperature: -20 ℃ to +250 ℃ (Metal bellows version up to 400 ℃).
-
MOR GB-SECCOMIX-11 Mechanical SealMaterials: According to customer's demands. Size: 25~160mm. Pressure: ≤10bar. linear velocity: ≤2m/s. Temperature: -20°C to 200°C (-4°F to 392°F).
-
MOR 8B1D reactor double mechanical sealMaterials: According to customer's demands. Size: 25-220mm or customized. Pressure: ≤5.0MPa. linear velocity: ≤30m/s. Temperature: -20~220 ºC.
-
MOR 155 Single Cartridge Mechanical Seal for Circulating PumpSize: 25 mm – 120 mm (1.0 – 4.75)Pressure: ≤2.5MpaSpeed: ≤16m/sTemperature: -20°C to +220°C (-4°F to +428°F) (elastomer‑dependent)
-
MOR SE2-AP Double Cartridge Mechanical SealSize: 25 mm – 110 mm. Pressure: 0 ~ 2.5 MPa. linear velocity: 20 m/s. Temperature: -40°C to +220°C.
-
MOR HTM Multi Spring Mechanical SealSize: 20-120mm. Pressure: ≤4MPa. Temperature: −40°C to 220°C. Linear Speed: ≤25m/s.
WebHigh-Pressure Leather U-Cup Seals. Rated for pressure up to 10, 000 psi, these leather U-cups handle over 80 times more pressure than our Buna-N U-cups. Spring-Loaded Seals. In addition to...
WebJan 1, 2012 · High-pressure sealing generally refers to confining fluids at pressures above 5,000 psi. Below these pressures, standard energized urethane lip seals and U-cup seals function...
WebHigh-Pressure Leather Stackable V-Ring Packing Seals These leather V-ring packing seals handle over twice the pressure as PTFE. Leather is tough, pliable, and wear...
Webhigh pressure application, as the torque is 4 - 5 times greater than the operational torque. This lack could impact correct operation of the seal due to friction increase and over-heating....
WebPump Seals. The scope of our mechanical pump seal product range far exceeds any other seal manufacturer. From small elastomer bellows seals used in millions of domestic water pumps to double...
WebThe Type 2106 mechanical seal is a compact, unitized, single-spring elastomer bellows seal that not only offers durability and performance but... Learn more Type 4111 Single...
