-
MOR SE2-AP Double Cartridge Mechanical SealSize: 25 mm – 110 mm. Pressure: 0 ~ 2.5 MPa. linear velocity: 20 m/s. Temperature: -40°C to +220°C.
-
MOR HRM Mechancial SealSize: 25–120 mm (custom sizes available). Pressure: 0–2.5 MPa (higher pressures on request). Temperature: −50 °C to +425 °C (material-dependent). Speed: ≤ 25 m/s
-
CURC glass lined reactor mechanical sealSize: 20 mm – 100 mm (custom sizes available). Pressure: ≤1.6MPA. linear velocity: ≤20m/s. Temperature: -20 °C to +180 °C (depends on elastomer material).
-
MOR DWB1 DWB2 Liquid Natural Gas Low Temperature Special Materials Mechanical Face SealMaterials: According to customer's demands. Size: Standard or customized. Pressure: ≤1 MPa. linear velocity: ≤8000 r/m. Temperature: -196°C to 100°C (-321°F to 212°F).
-
MOR GB-SECCOMIX-11 Mechanical SealMaterials: According to customer's demands. Size: 25~160mm. Pressure: ≤10bar. linear velocity: ≤2m/s. Temperature: -20°C to 200°C (-4°F to 392°F).
-
MOR 8B1D reactor double mechanical sealMaterials: According to customer's demands. Size: 25-220mm or customized. Pressure: ≤5.0MPa. linear velocity: ≤30m/s. Temperature: -20~220 ºC.
-
MOR SE2 cartridge type mechanical seal partsSize: 30 mm to 100 mm. Pressure: 0 ~ 20 bar. linear velocity: 30m/s. Temperature: -20°C to 180°C (356°F).
-
MOR LC900/1150II Mechanical Seal (For FGD Slurry Circulation Pumps)Size: Up to 250 mm (compatible with LC900/1150 pumps). Pressure: ≤1.6MPa. Temperature: ≤250℃. Speed≤ 15 m/s
-
MOR SAF High Pressure Mechanical SealSize: 25 mm – 120 mm. Pressure : up to 10.0 MPa (100 bar) or higher. Linear velocity: ≤25m/s. Temperature: - 40 ~ 250 ºC.
-
MOR LP-D Dual Cartridge Mechanical SealSize: 25 mm – 120 mm (1.0 – 4.75). Pressure: ≤ 4.0 MPa (40 bar). Linear velocity: ≤ 25 m/s. Temperature: - 40 ~ 250 ºC.
-
MOR HTM Multi Spring Mechanical SealSize: 20-120mm. Pressure: ≤4MPa. Temperature: −40°C to 220°C. Linear Speed: ≤25m/s.
-
MOR 522 EKATO Single-Acting Mechancial SealSize: 40-220mm. Pressure: ≤4 MPa. linear velocity: ≤15 m/s. Temperature: - 50 ~ 400 ºC.
Aug 17, 2023 · There are three ways seal faces are configured / arranged in double mechanical seals: Back-to-Back, Tandem, and Face-to-Face. Each configuration has its own strengths which are...
A double mechanical seal is an advanced sealing solution that utilizes two independent seals to provide superior protection against leakage in rotating equipment such as pumps, mixers, and...
Jun 4, 2024 · Explore the various configurations of double mechanical seals used in pumps and other rotating equipment to prevent leaks and ensure reliability....
May 27, 2020 · Double seals are used when leakage of pumped fluid to the atmosphere is not allowed. Tandem seals are two single seals mounted in the same direction. Tandem seals are used for toxic or...
Mar 21, 2025 · What Is the Difference Between a Single and Double Mechanical Seal? A single mechanical seal has one set of sealing faces and is suitable for non-hazardous applications. A double...
Cartex Dual seals . Dual seal; Cartridge; Balanced; Independent of direction of rotation; Double pressure balanced; Integrated pumping device; Variants available: for eccentric screw pumps (-Vario)...
