-
MOR DWB1 DWB2 Liquid Natural Gas Low Temperature Special Materials Mechanical Face SealMaterials: According to customer's demands. Size: Standard or customized. Pressure: ≤1 MPa. linear velocity: ≤8000 r/m. Temperature: -196°C to 100°C (-321°F to 212°F).
-
MOR Stern Tube SealMOR Marine Stern Tube Air Seal for a marine stern tube air seal system, which is a critical part of the stern shaft sealing assembly for large oil-lubricated propeller shafts. It prevents seawater
-
MOR 523 LIGHTNIN Spring SealShaft size: 18–120 mm (standard)Pressure: ≤ 1.5 MPa (15 bar) / ≤ 3.0 MPa (30 bar)Temperature: 0–150 °C (standard) / −20–200 °C (high‑temp)Speed: ≤ 5 m/s (mixer) / ≤ 20 m/s (pump)
-
MOR HRM Mechancial SealSize: 25–120 mm (custom sizes available). Pressure: 0–2.5 MPa (higher pressures on request). Temperature: −50 °C to +425 °C (material-dependent). Speed: ≤ 25 m/s
-
MOR JCS2A Pharmaceutical Centrifugal Pump SealsSize: 30–120 mm (custom sizes available). Pressure: 0–2.5 MPa (process); up to 1.5 MPa (barrier fluid). linear velocity: ≤20m/s. Temperature: -20 °C to +180 °C (standard); -40 °C to +220 °C (special
-
MOR SV Series Cartridge Mechanical Seal (For Side-Entry Agitator)Size: 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / custom mm size. Pressure: ≤ 1.6 MPa. linear velocity: ≤15 m/s. Temperature: -20 ℃ ~ +180 ℃ (depending on O-ring material). Mediums: oil, acid, alkali, and polymer
-
MOR M481KL mechanical sealSize: 25 – 100 mm (custom sizes available). Pressure: ≤2.5mpa. linear velocity: ≤20m/s. Temperature: -20 °C to +220 °C (material‑dependent).
-
MOR CDPN Dual Pressurized Mechanical SealSize: 24 mm – 85 mm (1.0 – 3.5); larger sizes available as CDP. Pressure: Vacuum to 2.5 MPa (25 bar); barrier fluid pressure: +0.1–0.3 MPa over process pressure. linear velocity: 20m/s.
-
MOR 318 Single Cartridge Mechanical SealSize: 20 mm – 100 mm or customized. Pressure: <1.6Mpa. linear velocity:<20m/s. Temperature:−20°C to 200°C.
-
MOR NLT-350/400AEF-300 Mechanical sealSize: 20-300mm. Pressure: ≤3.5MPa. Temperature: ≤280℃. Speed: ≤ 15 m/s.
-
MOR CSSN cartridge type sealSize: 24 mm – 150 mm (1 – 6). Pressure: ≤ 2Mpa. Linear velocity: ≤ 20 m/s. Temperature: -40°C to +220°C (material‑dependent).
-
MOR Cartex universal mechanical sealSize: 25–100 mm (1.0–4.0 in); custom sizes available. Pressure: ≤2.0MPa. linear velocity: ≤ 10 m/s (standard); up to 23 m/s for high‑speed variants. Temperature: -40°C to +220°C (-40°F to 428°F).
WebProduct Description. For decades, GOETZE ® mechanical face seals have been utilized with outstanding success in transmissions, pumps, axles and drive mechanics. The special GOETZE ® cast iron...
Webinstalling seals, providing all relevant documentation within the interface. It guides you to successful installation of Radial Oil Seals, Mechanical Face Seals and Turcon® and...
WebAn end face mechanical seal is a device intended to prevent or minimize leakage from a vessel through the clearance around a rotating shaft entering that vessel. Perhaps the most common example is...
WebMechanical Face Seals. KLOZURE® Mechanical Seals are engineered to meet the demands of challenging sealing applications. Through the innovative use of materials,...
Web3/8 Inch Shaft, 511 Industry Specification, Buna-N Diaphragm, Mechanical Face Seal. 5/8 Working Length, 0.218 Seat Thickness, 0.917 Seal Outside Diameter, Phenolic Washer. List Price. $233.14 /...
WebThe mechanical face seal type 76.95 consists of two metallic angular seal rings with identical contours. The seal rings are assembled with trapezoid elastomer parts positioned against the housing...
