-
MOR 204B 204B Single Mechanical Seal for Reactors & AgitatorsSize: 25 mm – 200 mm (custom sizes available). Pressure: Vacuum to 1.0 MPa (10 bar). linear velocity: ≤15 m/s. Temperature: - 40 ~ 180 ºC.
-
MOR 48LP mechanical sealShaft Diameter: 20 mm – 120 mm (0.787” – 4.724”)Working Pressure: Up to 3.0 MPaWorking Temperature: -20 °C ~ +220 °C (dependent on elastomer material)Rotating Speed: Up to 3800 r/minTemperature:
-
MOR T.587-D/8B1D-SP-D Cartridge Mechanical SealThe MOR T.587-D/8B1D-SP-D cassette mechanical seal features a single-sided double-balance design; it is a specially customized variant derived from the General Motors 587-SP series. Advantages This
-
MOR H75N mechanical seal in reactorMaterials: According to customer's demands. Size: 25~160mm. Pressure: ≤1.0MPa. linear velocity: ≤2m/s. Temperature: -20°C to 200°C (-4°F to 392°F).
-
MOR 8B1D reactor double mechanical sealMaterials: According to customer's demands. Size: 25-220mm or customized. Pressure: ≤5.0MPa. linear velocity: ≤30m/s. Temperature: -20~220 ºC.
-
MOR 155 Single Cartridge Mechanical Seal for Circulating PumpSize: 25 mm – 120 mm (1.0 – 4.75)Pressure: ≤2.5MpaSpeed: ≤16m/sTemperature: -20°C to +220°C (-4°F to +428°F) (elastomer‑dependent)
-
MOR SE2 cartridge type mechanical seal partsSize: 30 mm to 100 mm. Pressure: 0 ~ 20 bar. linear velocity: 30m/s. Temperature: -20°C to 180°C (356°F).
-
MOR SAF High Pressure Mechanical SealSize: 25 mm – 120 mm. Pressure : up to 10.0 MPa (100 bar) or higher. Linear velocity: ≤25m/s. Temperature: - 40 ~ 250 ºC.
-
MOR JCS1 JCS1F Mechanical sealsSize: 30~100mm. Pressure: ≤16bar. linear velocity: ≤20m/s. Temperature: -20℃+120℃.
-
MOR JCS1A Mechanical Seals for Centrifugal PumpsSize: 20 mm – 110 mm. Pressure: ≤ 1.6Mpa. linear velocity: ≤20m/s. Temperature: -20°C to +180°C (depending on elastomer material).
-
MOR SE2-AP Double Cartridge Mechanical SealSize: 25 mm – 110 mm. Pressure: 0 ~ 2.5 MPa. linear velocity: 20 m/s. Temperature: -40°C to +220°C.
-
MOR NLT-350/400AEF-300 Mechanical sealSize: 20-300mm. Pressure: ≤3.5MPa. Temperature: ≤280℃. Speed: ≤ 15 m/s.
Product recirculation from seal chamber to pump suction via a flow control orifice. Features. Provides continuous vent for vertical pumps. Use. Wherever Plan 11 is not usable due to low-pressure...
6 days ago · Vertical cantilever pumps are used for fluids with suspended solids, such as sludges and slurries in the food processing, paper milling, sewage, and gas & oil industries. The...
Open the inlet and outlet valves to separate the pump. Take out the casing drain plug to empty any fluid in the pump. It will stop fluid leaks while taking apart the pump and mechanical seal. 3....
Split Seals for Pump. Some types of machinery are cumbersome to maintain. ... shafts, heavy components, and immovable drivers are some of these concerns. One of the best uses of Split mechanical...
Sep 3, 2024 · Replacing the seal in a vertical multistage pump is a straightforward process with the right knowledge and tools. Regular maintenance and timely seal replacement can...
mechanical seal in a vertical pump, it is important to consider how the pump equipment can affect the seal chamber pressure so that the proper piping plan can be selected. And if properly...
