-
MOR BXHHB BXH API mechanical sealSize: 21.8-127mm. Temperature: -73°C- 427°C. Pressure: ≤20.7 bar. Speed: ≤25 mps.
-
MOR BQFDR cartridge mechanical sealShaft Diameter: 24 mm – 100 mm (1.000” – 4.000”)Working Pressure: Up to 2.5 MPaWorking Temperature: -40 °C ~ +300 °C (dependent on elastomer)Rotating Speed: Up to 25 m/sTemperature: 0~200°C.
-
MOR 604 High Temperature Metal Bellow Mechanical SealSize: 25–100 mm (custom sizes available). Pressure: 0–2.5 MPa (higher on request). linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (depends on bellows material).
-
Equivalent To MFL85N Metal Bellow Mechanical SealSize: 16-100mm. Pressure:- 0.1 ~ 2.5 MPa. linear velocity: ≤20m/s. Temperature: - 40 ~ 220 ºC. Mediums: hot water, oil, liquid hydrocarbon, acid, alkali, solvents, paper pulp and other
-
MOR MFL95N Metal Bellow Mechanical SealSize: 14 mm to 100 mm. Pressure: ≤1.6Mpa. linear velocity: ≤20m/s. Temperature: -40°C to +220°C.
-
MOR 102 Booster Pump Metal Bellow Mechanical SealSize: 16-100mm. Pressure:- 0.1 ~ 2.5 MPa. linear velocity: ≤15m/s. Temperature: - 40 ~ 200 ºC. Mediums: hot water, oil, liquid hydrocarbon, acid, alkali, solvents, paper pulp and other
-
Equivalent to Flowserve Durametallic X-200 Metal Bellows Mechanical SealSize: 25 mm – 150 mm (1 – 6). Pressure:Up to 41 bar (600 psi) (single seal); up to 27 bar (400 psi) (dual seal). linear velocity: ≤30m/s. Temperature: -200°C to +425°C (-328°F to +800°F)
-
MOR MFLWT 80 Rotating Mechanical SealSize: 38~127mm(custom sizes available). Pressure: ≤25bar. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material-dependent).
-
MOR LBG Cartridge Metal Bellow SealSize: 25~100mm. Pressure: ≤2.5MPa. Linear velocity: ≤6000r/m. Temperature: -70°C to 400°CThis seal is mainly used for coal-fired power generation boiler feed water pump.
-
MOR EBU metal bellow mechanical sealSize: 25 mm – 100 mm (1 – 4). Pressure: ≤25bar. linear velocity: ≤50m/s. Temperature: -40°C to +425°C (-40°F to +800°F) (material‑dependent).
-
MOR 609 bellows shaft sealSize: 25–100 mm (custom sizes available). Pressure: 0-2.5MPa. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material‑dependent).
-
MOR 523 LIGHTNIN Spring SealShaft size: 18–120 mm (standard)Pressure: ≤ 1.5 MPa (15 bar) / ≤ 3.0 MPa (30 bar)Temperature: 0–150 °C (standard) / −20–200 °C (high‑temp)Speed: ≤ 5 m/s (mixer) / ≤ 20 m/s (pump)
The American Petroleum Institute (API) agreed to establish a standard for mechanical seals: API 682. A task force was formed in 1990 and the first meeting was held in January 1991....
This brochure provides basic information about API 682 4th edition. It contains a set of charts and summaries that give a brief overview and represent a step-by-step method to specify and...
API 682 is the leading document for mechanical seals in petrochemical, chemical, and pipeline services worldwide. It has combined the aspects of seal design, testing, standardization, and...
Does Your Greenhouse Gas (GHG) Emissions Reduction Strategy Include Asset Management? How Does Upstream Pumping Technology Fit Into API 682? A primary factor in achieving highly reliable, effective...
API Piping plans help to ensure good conditions for mechanical seal operation as well as improving safety and pump reliability. Please contact AESSEAL Systems Division for further...
This article explores the intricacies of API mechanical seals, delving into the API 682 standard, seal types and arrangements, support systems, piping plans, selection criteria, and the...
