-
![MOR BXHHB BXH API mechanical seal]()
MOR BXHHB BXH API mechanical sealSize: 21.8-127mm. Temperature: -73°C- 427°C. Pressure: ≤20.7 bar. Speed: ≤25 mps. -
![MOR MFLWT 80 Rotating Mechanical Seal]()
MOR MFLWT 80 Rotating Mechanical SealSize: 38~127mm(custom sizes available). Pressure: ≤25bar. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material-dependent). -
![MOR LBG Cartridge Metal Bellow Seal]()
MOR LBG Cartridge Metal Bellow SealSize: 25~100mm. Pressure: ≤2.5MPa. Linear velocity: ≤6000r/m. Temperature: -70°C to 400°CThis seal is mainly used for coal-fired power generation boiler feed water pump. -
![MOR EBU metal bellow mechanical seal]()
MOR EBU metal bellow mechanical sealSize: 25 mm – 100 mm (1 – 4). Pressure: ≤25bar. linear velocity: ≤50m/s. Temperature: -40°C to +425°C (-40°F to +800°F) (material‑dependent). -
![MOR 609 bellows shaft seal]()
MOR 609 bellows shaft sealSize: 25–100 mm (custom sizes available). Pressure: 0-2.5MPa. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material‑dependent). -
![MOR 523 LIGHTNIN Spring Seal]()
MOR 523 LIGHTNIN Spring SealShaft size: 18–120 mm (standard)Pressure: ≤ 1.5 MPa (15 bar) / ≤ 3.0 MPa (30 bar)Temperature: 0–150 °C (standard) / −20–200 °C (high‑temp)Speed: ≤ 5 m/s (mixer) / ≤ 20 m/s (pump) -
![MOR HRM Mechancial Seal]()
MOR HRM Mechancial SealSize: 25–120 mm (custom sizes available). Pressure: 0–2.5 MPa (higher pressures on request). Temperature: −50 °C to +425 °C (material-dependent). Speed: ≤ 25 m/s -
![MOR 206 Vacuum Pump Mechanical Seal]()
MOR 206 Vacuum Pump Mechanical SealSize:10-50mm. Pressure:Vacuum to 0.8 MPa. linear velocity: ≤12m/s. Temperature: -40℃～350℃. -
![MOR JCS2A Pharmaceutical Centrifugal Pump Seals]()
MOR JCS2A Pharmaceutical Centrifugal Pump SealsSize: 30–120 mm (custom sizes available). Pressure: 0–2.5 MPa (process); up to 1.5 MPa (barrier fluid). linear velocity: ≤20m/s. Temperature: -20 °C to +180 °C (standard); -40 °C to +220 °C (special -
![MOR 286HT]()
MOR 286HTSize: 25 mm – 610 mm (1.0 – 24) or customized. Pressure: 0～2MPa. linear velocity: ≤20r/m. Temperature: -40°C to 400°C (-40°F to 750°F). -
![MOR SV Series Cartridge Mechanical Seal (For Side-Entry Agitator)]()
MOR SV Series Cartridge Mechanical Seal (For Side-Entry Agitator)Size: 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / custom mm size. Pressure: ≤ 1.6 MPa. linear velocity: ≤15 m/s. Temperature: -20 ℃ ~ +180 ℃ (depending on O-ring material). Mediums: oil, acid, alkali, and polymer -
![MOR 8BIVORS Single Mechanical Seal]()
MOR 8BIVORS Single Mechanical SealSize: 20 – 100 mm (Custom sizes available). Pressure: Vacuum to 1.6 MPa. linear velocity: ≤20m/s. Temperature: -20 ℃ to +250 ℃ (Metal bellows version up to 400 ℃).
As one of the most professional mechanical seal suppliers in China, we're featured by quality products and competitive price. If you're going to buy customized mechanical seal, welcome to get quotation from our factory.
Popular Products
208 Mechanical Seal Replacement for Pump with Low Pressure
Shaft Diameter: 12–80 mmWorking Pressure: ≤1.6 MPaWorking Temperature: -20°C to 180°C (depending on elastomer
MOR TDGSF2 Dry Gas Seal
Pressure: ~300barTemperature: -195℃~280℃Speed: 45000RPM
MOR S2GD2 Double Cartridge Dry Gas Seal for Compressor
Pressure: ~300barTemperature: -195℃~280℃Speed: 45000RPM
MOR BQFDR cartridge mechanical seal
Shaft Diameter: 24 mm – 100 mm (1.000” – 4.000”)Working Pressure: Up to 2.5 MPaWorking Temperature: -40 °C ~ +300 °C
MOR 48LP mechanical seal
Shaft Diameter: 20 mm – 120 mm (0.787” – 4.724”)Working Pressure: Up to 3.0 MPaWorking Temperature: -20 °C ~ +220 °C
MOR S025 Split Seals for Shafts
Size: 80 mm – 300 mm (or larger, custom)Pressure: ≤ 6.5 MPa (65 bar)linear velocity: ≤ 25 m/sTemperature: −40°C to