-
MOR 105 Chemical Mechanical Seal for Caustic PumpShaft diameter: 12 mm – 80 mmPressure: ≤ 1.0 MPa (10 bar)Temperature: −20°C to 180°CSpeed: ≤ 15 m/sTemperature:-20-180℃.
-
224 Double Acting Mechanical Seal for Centrifugal PumpSize: 20-120mm. Pressure: ≤ 1.0 MPa (10 bar) (unbalanced, 224UU),≤ 2.0 MPa (20 bar) (balanced, 224TZ)Speed: ≤3000r/imin. Temperature:-20~+150℃.
-
502 Replacement Single Spring Bellow Mechanical Seal for Petrochemical IndustrySize: 14-100mm. Pressure: ≤4Mpa. linear velocity: ≤13m/s. Temperature:-40°C to +205°C.
-
John Crane 112 Replacement Unbalanced mechanical sealSize: 20-120mm. Pressure: ≤ 1.2MPa. linear velocity: ≤ 15m/s. Temperature: -20~180℃.
-
MOR 2 high temperature mechanical sealMaterials: According to customer's demands. Size: 10-120mm. Pressure:≤ 10bar. linear velocity:≤ 10m/s. Temperature:-30°C- 200°C.
-
MOR SEV High Speed Mechanical Seal for Waste Water PumpMaterials: According to customer's demands. Size: 10-100mm. Pressure:≤ 1.2Mpa. linear velocity:≤ 10m/s. Temperature:-30°C - 200°C.
-
Equivalent to M32 sewage pump mechanical sealMaterials: According to customer's demands. Size: 8-100mm. Pressure: ≤1.0Mpa. linear velocity:≤15m/s. Temperature:-20℃~200℃. Mediums: oil, water, amorphism acid, alkali, salt, and organic solvents..
-
Replacement for Type 8 Oil and Gas Rubber Bellow SealMaterials: According to customer's demands. Size: 12-100mm. Pressure: ≦10Mpa. linear velocity:≤25m/s. Temperature: -0°C-160°C.
-
MOR m7n mechanical sealMaterials: According to customer's demands. Size: 14-200mm. Pressure: ≤2.5Mpa. linear velocity:≤20m/s. Temperature: -20~220(℃). Mediums: oil, water, acid, alkali, organic solvents and subjects that
-
MOR Flygt 4560 Pump Mechanical SealMaterials: According to customer's demands. Size: Standard or customized. Pressure: ≤1.6Mpa. Linear speed: ≤10m/s. Temperature: -20℃~180℃. Sewage pump, slurry pump, submersible pump, submersible
-
MOR MG13 Rubber Bellow Mechanical SealMaterials: According to customer's demands. Size: Standard or customized. Pressure:≤1. 2MPa. linear velocity: ≤10m/s. Temperature: -20°C to +120°C.
-
MOR 2100 Sewage Water Pump Spring SealMaterials: According to customer's demands. Size:10-100mm. Pressure: ≤ 1.2 MPa. linear velocity: ≤10m/s. Temperature:-20°C to +200°C. Mediums: oil, water, sewage, food and beverage, paper pulp and
May 15, 2003 · In some applications finned tubing and insulation on the return leg might be a good idea. The reservoir should be high enough to offer enough resonance time and head (a...
Aug 29, 2023 · Mechanical seals are often used for dynamic sealing in pumps and must be designed to handle the caustic nature of the chemicals. In some cases, external flush plans might be needed to...
Mar 1, 2021 · Understanding these seal design options and arrangements for caustic applications, along with their benefits and shortcomings, will help chemical operations avoid costly...
Understanding these seal design options and arrangements for caustic applications, along with their benefits and shortcomings, will help chemical operations avoid costly mechanical failures,...
Caustic solutions form harmful crystals as the liquid evaporates and the concentration increases past the solubility point. As the solution becomes hotter or more concentrated (or both), it...
Oct 29, 2019 · When picking the right pump for chemical applications, there are many factors to consider. True, for many mid-to-large-scale industrial fluid...
