-
MOR WB2 10T 10R PTFE Elastomer Bellow Mechanical SealMaterials: According to customer's demands. Size: 20-80mm. Pressure: ≤0.8MPa. linear velocity: ≤10m/s. Temperature: -20~120℃.
-
MOR 58U 59U Mechanical Seal for Centrifugal PumpSize: 14-100mm. Pressure: ≤ 1.7 MPa (17 bar). linear velocity: ≤25 m/s. Temperature: - 50 ~ 400 ºC.
-
224 Double Acting Mechanical Seal for Centrifugal PumpSize: 20-120mm. Pressure: ≤ 1.0 MPa (10 bar) (unbalanced, 224UU),≤ 2.0 MPa (20 bar) (balanced, 224TZ)Speed: ≤3000r/imin. Temperature:-20~+150℃.
-
John Crane 112 Replacement Unbalanced mechanical sealSize: 20-120mm. Pressure: ≤ 1.2MPa. linear velocity: ≤ 15m/s. Temperature: -20~180℃.
-
MOR 2 high temperature mechanical sealMaterials: According to customer's demands. Size: 10-120mm. Pressure:≤ 10bar. linear velocity:≤ 10m/s. Temperature:-30°C- 200°C.
-
MOR SEV High Speed Mechanical Seal for Waste Water PumpMaterials: According to customer's demands. Size: 10-100mm. Pressure:≤ 1.2Mpa. linear velocity:≤ 10m/s. Temperature:-30°C - 200°C.
-
Equivalent to M32 sewage pump mechanical sealMaterials: According to customer's demands. Size: 8-100mm. Pressure: ≤1.0Mpa. linear velocity:≤15m/s. Temperature:-20℃~200℃. Mediums: oil, water, amorphism acid, alkali, salt, and organic solvents..
-
212 Multi Spring Balanced Teflon Bellow Mechanical SealMaterials: According to customer's demands. Size: 45mm. Pressure: ≤0.8MPa. linear velocity: ≤15m/s. Temperature: -40°C~180°C.
-
MOR MG1 MB1 109 Mechanical SealMaterials: According to customer's demands. Size: 10~110 mm. Pressure: ≤1.0 MPa. linear velocity: ≤10m/s. Temperature: - 20 ~ 120 ºC. Mediums: oil, water, sewage, food and beverage, paper pulp and
-
MOR 527 compressor mechanical sealMaterials: According to customer's demands. Size: 18 mm to 120 mm. Pressure: ≤0.8 MPa. linear velocity: ≤15 m/s. Temperature: -20°C to 200°C (-4°F to 392°F). Mediums: oil, water, amorphism acid,
-
MOR Wilo High Pressure Pump Mechanical SealMaterials: According to customer's demands. Size: 35 mm to 75mm. Pressure: ≤12bar. linear velocity: ≤10 m/s. Temperature: -40℃~200℃. Mediums: water and weak corrosion liquids..
-
Equivalent to John Crane Type 21 Single Marine Mechanical Seal for Sewage PumpType: Mechanical seal for sewage pumpMaterials: According to customer's demandsSize: 14-100mmPressure: ≤0.8 Mpalinear velocity: ≤10m/sTemperature: - 20 ~ 120 ºC
PTFE bellow mechanical seal AS-E10R OR10T, can be replaced of Johncrane 10R or 10T. We could manufacture seals according to your sample or drawing, and design as your request. Read More...
The mechanical seal of the PTFE bellow seal, which adopts the multi-spring structure, is the most widely used mechanical seal in the corrosion resistant pump. Following is the Operating...
Our PTFE Teflon bellows are machined from custom materials like PTFE or other compounds with outstanding strength, flexibility and longer service life. ️ Get Free Quote...
The mechanical seal of the PTFE bellow seal, which adopts the multi-spring structure, is the most widely used mechanical seal in the corrosion resistant pump. Following is the Operating parameters:...
WB3 PTFE Bellow Mechanical Seal for Acid Proof Pumps, Plastic Pumps, Alkali Pumps, and Vacuum Equipment. Structural Features: single end, balanced, independent direction of...
Flexible PTFE bellows provide maximum corrosion resistance, eliminate the possibility of seal face misalignment and compensate for shaft run-out to promote low-maintenance, long-life...
