-
MOR LBG Cartridge Metal Bellow SealSize: 25~100mm. Pressure: ≤2.5MPa. Linear velocity: ≤6000r/m. Temperature: -70°C to 400°CThis seal is mainly used for coal-fired power generation boiler feed water pump.
-
MOR BQFDR cartridge mechanical sealShaft Diameter: 24 mm – 100 mm (1.000” – 4.000”)Working Pressure: Up to 2.5 MPaWorking Temperature: -40 °C ~ +300 °C (dependent on elastomer)Rotating Speed: Up to 25 m/sTemperature: 0~200°C.
-
MOR 604 High Temperature Metal Bellow Mechanical SealSize: 25–100 mm (custom sizes available). Pressure: 0–2.5 MPa (higher on request). linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (depends on bellows material).
-
Equivalent To MFL85N Metal Bellow Mechanical SealSize: 16-100mm. Pressure:- 0.1 ~ 2.5 MPa. linear velocity: ≤20m/s. Temperature: - 40 ~ 220 ºC. Mediums: hot water, oil, liquid hydrocarbon, acid, alkali, solvents, paper pulp and other
-
MOR MFL95N Metal Bellow Mechanical SealSize: 14 mm to 100 mm. Pressure: ≤1.6Mpa. linear velocity: ≤20m/s. Temperature: -40°C to +220°C.
-
MOR 102 Booster Pump Metal Bellow Mechanical SealSize: 16-100mm. Pressure:- 0.1 ~ 2.5 MPa. linear velocity: ≤15m/s. Temperature: - 40 ~ 200 ºC. Mediums: hot water, oil, liquid hydrocarbon, acid, alkali, solvents, paper pulp and other
-
Equivalent to Flowserve Durametallic X-200 Metal Bellows Mechanical SealSize: 25 mm – 150 mm (1 – 6). Pressure:Up to 41 bar (600 psi) (single seal); up to 27 bar (400 psi) (dual seal). linear velocity: ≤30m/s. Temperature: -200°C to +425°C (-328°F to +800°F)
-
MOR BXHHB BXH API mechanical sealSize: 21.8-127mm. Temperature: -73°C- 427°C. Pressure: ≤20.7 bar. Speed: ≤25 mps.
-
MOR MFLWT 80 Rotating Mechanical SealSize: 38~127mm(custom sizes available). Pressure: ≤25bar. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material-dependent).
-
MOR EBU metal bellow mechanical sealSize: 25 mm – 100 mm (1 – 4). Pressure: ≤25bar. linear velocity: ≤50m/s. Temperature: -40°C to +425°C (-40°F to +800°F) (material‑dependent).
-
MOR 609 bellows shaft sealSize: 25–100 mm (custom sizes available). Pressure: 0-2.5MPa. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material‑dependent).
-
CURC glass lined reactor mechanical sealSize: 20 mm – 100 mm (custom sizes available). Pressure: ≤1.6MPA. linear velocity: ≤20m/s. Temperature: -20 °C to +180 °C (depends on elastomer material).
MFL85N. For unstepped shafts. Single seal. Balanced. Independent of direction of rotation. Metal bellows rotating....
Configurable with a rotating or stationary bellows to fit a wide range of high temperature application needs API 682 Pressure: up to 20.7 bar (300 psi) Temperature: -73°C to 427°C (...
Metal Bellows Seals. About this product. BXHHS and BXRH seals provide sealing capability at extreme temperatures in challenging refinery and petrochemical services. When pumping...
Metal Bellows Seals for Pumps Metal bellows seals feature a bellows core made of one of several types of bellows. The most common are AM350 and Hastelloy C. Usually with Stainless Steel end fittings...
Metal Bellows Seals | Mechanical Shaft Seal and O-rings Seal Types In-House Services EPTFE Joint Sealant There is no sealing device more expensive than a cheap one. We are unique....
Metal Bellow Seals John Crane brings you the world’s most complete selection of performance-proven edge-welded and formed metal bellows sealing products used in a wide range of...
