-
MOR DWB1 DWB2 Liquid Natural Gas Low Temperature Special Materials Mechanical Face SealMaterials: According to customer's demands. Size: Standard or customized. Pressure: ≤1 MPa. linear velocity: ≤8000 r/m. Temperature: -196°C to 100°C (-321°F to 212°F).
-
MOR 8BIVORS Single Mechanical SealSize: 20 – 100 mm (Custom sizes available). Pressure: Vacuum to 1.6 MPa. linear velocity: ≤20m/s. Temperature: -20 ℃ to +250 ℃ (Metal bellows version up to 400 ℃).
-
MOR M481KL mechanical sealSize: 25 – 100 mm (custom sizes available). Pressure: ≤2.5mpa. linear velocity: ≤20m/s. Temperature: -20 °C to +220 °C (material‑dependent).
-
MOR 5610 Series Mechanical SealSize:25 mm – 100 mm (Custom sizes available). Temperature: -20 °C to +180 °C (depends on elastomer material). Pressure:≤1.6MPa. Liner Speed: ≤25m/s.
-
MOR 204B 204B Single Mechanical Seal for Reactors & AgitatorsSize: 25 mm – 200 mm (custom sizes available). Pressure: Vacuum to 1.0 MPa (10 bar). linear velocity: ≤15 m/s. Temperature: - 40 ~ 180 ºC.
-
MOR 528 balanced sealSize: 25 mm – 100 mm (custom sizes available). Pressure: ≤ 2.5 MPa (25 bar). linear velocity: ≤20m/s. Temperature: -40 °C to +220 °C (elastomer version) / up to 400 °C (metal bellows version).
-
CURC glass lined reactor mechanical sealSize: 20 mm – 100 mm (custom sizes available). Pressure: ≤1.6MPA. linear velocity: ≤20m/s. Temperature: -20 °C to +180 °C (depends on elastomer material).
-
MOR GB-SECCOMIX-11 Mechanical SealMaterials: According to customer's demands. Size: 25~160mm. Pressure: ≤10bar. linear velocity: ≤2m/s. Temperature: -20°C to 200°C (-4°F to 392°F).
-
MOR SE1 Balanced Mechanical Seal for Power Plant Sulzer PumpSize: 30 mm to 100 mm. Pressure: 0 ~ 1.5 MPa. linear velocity: 20 m/s. Temperature: -20°C to 120°C (250°F) (elastomer‑dependent).
-
MOR SE2 cartridge type mechanical seal partsSize: 30 mm to 100 mm. Pressure: 0 ~ 20 bar. linear velocity: 30m/s. Temperature: -20°C to 180°C (356°F).
-
MOR SAF High Pressure Mechanical SealSize: 25 mm – 120 mm. Pressure : up to 10.0 MPa (100 bar) or higher. Linear velocity: ≤25m/s. Temperature: - 40 ~ 250 ºC.
-
MOR JCS1C Single Acting Hydraulic Cylinder SealSize: 30~100mm. Pressure: 0 ~ 2.0 MPa. linear velocity: ≤20 m/s. Temperature: - 20 ~ 180 ºC.
The CC3 is a quick-response sprinkler designed to protect concealed spaces with non-combustible to light-hazard occupancies. It can be used in BlazeMaster® CPVC wet pipe, steel wet pipe, or dry pipe...
Oct 13, 2016 · Here we will review the different technologies and their purposes. Foam-Water. A foam-water fire sprinkler system is a special application system which discharges a mixture of water...
Jul 11, 2007 · 1306.0040 STANDARD.. Automatic sprinkler systems must comply with the applicable standard referenced in the State Building Code. If a public water supply is not available, the building...
Deluge systems sprinkler systems provide high flow and high volume of discharge over the hazardous area in a fire scenario in the quickest time possible. Foam System In healthcare facilities foam...
Choosing the right fire sprinkler system is essential to protecting property and life safety. With Reliable’s selection of advanced special hazards fire protection...
Nov 23, 2021 · Special hazard suppression systems are optimized for different business environments and certain types of fire. Special hazard suppression systems are organized into five main...
