-
MOR 206 Vacuum Pump Mechanical SealSize:10-50mm. Pressure:Vacuum to 0.8 MPa. linear velocity: ≤12m/s. Temperature: -40℃~350℃.
-
FFGD Single Cartridge Mechanical Seal For Suler MSD PumpPressure: Up to 300 bar (4,400 psi)Temperature: −20°C to 250°C (−4°F to 482°F)Shaft sizes: Compatible with Sulzer MSD pump shaft diameters
-
MOR 523 LIGHTNIN Spring SealShaft size: 18–120 mm (standard)Pressure: ≤ 1.5 MPa (15 bar) / ≤ 3.0 MPa (30 bar)Temperature: 0–150 °C (standard) / −20–200 °C (high‑temp)Speed: ≤ 5 m/s (mixer) / ≤ 20 m/s (pump)
-
MOR HRM Mechancial SealSize: 25–120 mm (custom sizes available). Pressure: 0–2.5 MPa (higher pressures on request). Temperature: −50 °C to +425 °C (material-dependent). Speed: ≤ 25 m/s
-
MOR JCS2A Pharmaceutical Centrifugal Pump SealsSize: 30–120 mm (custom sizes available). Pressure: 0–2.5 MPa (process); up to 1.5 MPa (barrier fluid). linear velocity: ≤20m/s. Temperature: -20 °C to +180 °C (standard); -40 °C to +220 °C (special
-
MOR SV Series Cartridge Mechanical Seal (For Side-Entry Agitator)Size: 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / custom mm size. Pressure: ≤ 1.6 MPa. linear velocity: ≤15 m/s. Temperature: -20 ℃ ~ +180 ℃ (depending on O-ring material). Mediums: oil, acid, alkali, and polymer
-
MOR M481KL mechanical sealSize: 25 – 100 mm (custom sizes available). Pressure: ≤2.5mpa. linear velocity: ≤20m/s. Temperature: -20 °C to +220 °C (material‑dependent).
-
MOR 528 balanced sealSize: 25 mm – 100 mm (custom sizes available). Pressure: ≤ 2.5 MPa (25 bar). linear velocity: ≤20m/s. Temperature: -40 °C to +220 °C (elastomer version) / up to 400 °C (metal bellows version).
-
MOR H75N mechanical seal in reactorMaterials: According to customer's demands. Size: 25~160mm. Pressure: ≤1.0MPa. linear velocity: ≤2m/s. Temperature: -20°C to 200°C (-4°F to 392°F).
-
MOR SB2 Mechanical SealSize: 12 mm – 80 mm. Pressure: 0-2MPA. linear velocity: ≤20m/s. Temperature: -20°C to 200°C (-4°F to 392°F).
-
MOR JCS1 JCS1F Mechanical sealsSize: 30~100mm. Pressure: ≤16bar. linear velocity: ≤20m/s. Temperature: -20℃+120℃.
-
Equivalent To C8B / C8U,8B / 8B1 Cartridge Type Mechanical SealSize: 20 mm – 120 mm (0.79 – 4.72). Pressure: ≤6.5 MPa. Temperature: −40°C to 220°C (−40°F to 428°F) (material dependent). Linear speed: ≤25m/s.
WebApr 12, 2022 · Best for different sized rings: Encore Standard Manual Vacuum Erection Device. Best for different tube sizes: SOMAerectStf Erectile Dysfunction System. Best for larger budgets: MVP...
WebApr 10, 2022 · 1. In some applications, this seal fluid is sent to a floor drain or some other treatment system. This is referred to as a once-through configuration and often what...
Web2. Mechanical shaft seals This section briefly describes the design and elements of the mechanical shaft seal. As previously stated, a pump with a through-shaft is not leakproof. The mechanical...
WebApr 17, 2018 · When considering gland packing vs mechanical seal solutions, mechanical seals are the best for minimizing sleeve damage. Packing seals are removed and replaced much more often than...
Web3.3.2.1 O-ring seals and grooves. When vacuum technology components are detachably joined, seals must be used to prevent ambient air from flowing into the vacuum. To prevent this, there are,...
Web- Vacuum port gasket - High pressure fuel pump seal - Graphite coated crush gasket and O ring for older style pumps rear - O ring for newer style pumps #2 - Original 2.0t FSI vacuum pump repair...
