What are the standards for double mechanical seals?

Jun 03, 2025

Leave a message

Emma Zheng
Emma Zheng
Head of Quality Assurance at MONOEL SEALS, ensuring that every product meets the highest international standards. Specializing in materials science and quality control systems, I am dedicated to maintaining our reputation as a leader in sealing technology.

Hey there! As a supplier of double mechanical seals, I've been getting a lot of questions lately about the standards for these crucial components. So, I thought I'd take some time to break it down for you in a way that's easy to understand.

MOR 286HT1(2)

What Are Double Mechanical Seals?

First off, let's quickly go over what double mechanical seals are. They're a type of seal used in pumps and other rotating equipment to prevent the leakage of fluids. Unlike single mechanical seals, double mechanical seals have two sets of sealing faces, which provide an extra layer of protection. This makes them ideal for applications where leakage can be a serious problem, such as in chemical processing, oil and gas, and power generation.

The Importance of Standards

Standards play a crucial role in the design, manufacture, and performance of double mechanical seals. They ensure that the seals meet certain quality and safety requirements, which is essential for reliable operation. Without standards, it would be difficult to compare different seals and make informed decisions about which one is right for your application.

Key Standards for Double Mechanical Seals

Material Standards

The materials used in double mechanical seals are critical to their performance and durability. Different applications require different materials, depending on the type of fluid being sealed, the operating temperature and pressure, and other factors.

  • Sealing Faces: The sealing faces are the most important part of a double mechanical seal, as they are responsible for preventing leakage. Common materials for sealing faces include carbon, silicon carbide, and tungsten carbide. Carbon is a soft material that provides good sealing performance, but it can wear out quickly in abrasive applications. Silicon carbide and tungsten carbide are harder materials that are more resistant to wear, but they can be more expensive.
  • Elastomers: Elastomers are used to provide a flexible seal between the sealing faces and the housing. Common elastomers used in double mechanical seals include nitrile rubber, fluorocarbon rubber, and ethylene propylene diene monomer (EPDM). The choice of elastomer depends on the chemical compatibility with the fluid being sealed and the operating temperature.
  • Metals: The metal components of a double mechanical seal, such as the gland plate and the sleeve, must be strong and corrosion-resistant. Common metals used in double mechanical seals include stainless steel, carbon steel, and alloy steel.

Design Standards

The design of a double mechanical seal also plays a crucial role in its performance. There are several design standards that manufacturers must follow to ensure that the seals are safe and reliable.

  • API 682: The American Petroleum Institute (API) has developed a standard for mechanical seals used in petroleum, petrochemical, and natural gas industries. API 682 provides guidelines for the design, testing, and installation of double mechanical seals. It covers topics such as seal arrangement, materials, lubrication, and cooling.
  • ISO 21049: The International Organization for Standardization (ISO) has developed a standard for mechanical seals used in centrifugal pumps. ISO 21049 provides guidelines for the design, testing, and installation of double mechanical seals. It covers topics such as seal types, materials, dimensions, and performance requirements.

Performance Standards

The performance of a double mechanical seal is measured by several factors, including leakage rate, temperature rise, and power consumption. There are several performance standards that manufacturers must follow to ensure that the seals meet the required specifications.

  • Leakage Rate: The leakage rate is the amount of fluid that leaks past the sealing faces of a double mechanical seal. The leakage rate is typically measured in milliliters per hour (ml/h) or cubic centimeters per minute (cc/min). The maximum allowable leakage rate depends on the application and the type of fluid being sealed.
  • Temperature Rise: The temperature rise is the increase in temperature of the fluid around the sealing faces of a double mechanical seal. The temperature rise is typically measured in degrees Celsius (°C) or degrees Fahrenheit (°F). The maximum allowable temperature rise depends on the materials used in the seal and the operating conditions.
  • Power Consumption: The power consumption is the amount of energy required to operate a double mechanical seal. The power consumption is typically measured in watts (W) or horsepower (hp). The power consumption depends on the size and type of the seal, the operating conditions, and the type of fluid being sealed.

Our Double Mechanical Seal Products

At our company, we offer a wide range of double mechanical seals that meet the highest standards of quality and performance. Our seals are designed and manufactured using the latest technology and materials to ensure reliable operation in even the most demanding applications.

  • MOR HRM Mechancial Seal: This is a high-performance double mechanical seal that is designed for use in a variety of applications, including chemical processing, oil and gas, and power generation. It features a compact design and a wide range of materials options to meet the specific needs of your application.
  • MOR LC900-1150II for Power Plant Desulfurization Pump Mechanical Seal: This is a specialized double mechanical seal that is designed for use in power plant desulfurization pumps. It features a unique design that provides excellent sealing performance and resistance to corrosion and abrasion.
  • MOR 286HT: This is a high-temperature double mechanical seal that is designed for use in applications where the operating temperature exceeds 200°C (392°F). It features a special design and materials that provide excellent sealing performance and resistance to thermal shock.

Conclusion

In conclusion, the standards for double mechanical seals are essential for ensuring reliable operation and safety. By following these standards, manufacturers can produce high-quality seals that meet the specific needs of different applications. If you're in the market for a double mechanical seal, it's important to choose a supplier that has a proven track record of quality and reliability.

If you have any questions about our double mechanical seals or would like to discuss your specific application, please don't hesitate to contact us. We're here to help you find the right seal for your needs and ensure that it performs reliably for years to come.

References

  • American Petroleum Institute. (2014). API 682: Pumps - Shaft Sealing Systems for Centrifugal and Rotary Pumps (4th ed.).
  • International Organization for Standardization. (2019). ISO 21049:2019: Centrifugal Pumps - Class II - Mechanical Seals.
Send Inquiry