Principle Of Dry Gas Seal

Nov 07, 2024

Leave a message

‌Dry gas seal‌ is a new type of non-contact dynamic pressure end seal, mainly used to seal gas or liquid media in rotating machines. Its working principle is based on the principles of fluid dynamics and fluid statics. By opening a gas groove on the end face of the dynamic ring, a stable gas film is formed to completely separate the sealing end faces, thereby achieving a sealing effect. ‌

 

The dry gas seal consists of a static ring and a dynamic ring. The static ring is loaded by a spring, and a gas groove is opened on the end face of the dynamic ring. When the sealing gas is injected into the sealing device, the dynamic ring rotates with the shaft, and the gas in the gas groove is sheared and flows from the outer edge to the center, generating dynamic pressure. The sealing weir has an inhibitory effect on the outflow of gas, causing the gas pressure to increase. This increased pressure separates the flexibly installed static ring from the paired dynamic ring, maintaining a minimum gap and forming a gas film. The thickness of the gas film is generally a few microns, which makes the rotating ring and the stationary ring out of contact, almost without wear, and at the same time seals the process gas.

Send Inquiry