-
Equivalent To MFL85N Metal Bellow Mechanical SealSize: 16-100mm. Pressure:- 0.1 ~ 2.5 MPa. linear velocity: ≤20m/s. Temperature: - 40 ~ 220 ºC. Mediums: hot water, oil, liquid hydrocarbon, acid, alkali, solvents, paper pulp and other
-
MOR BQFDR cartridge mechanical sealShaft Diameter: 24 mm – 100 mm (1.000” – 4.000”)Working Pressure: Up to 2.5 MPaWorking Temperature: -40 °C ~ +300 °C (dependent on elastomer)Rotating Speed: Up to 25 m/sTemperature: 0~200°C.
-
MOR 604 High Temperature Metal Bellow Mechanical SealSize: 25–100 mm (custom sizes available). Pressure: 0–2.5 MPa (higher on request). linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (depends on bellows material).
-
MOR MFL95N Metal Bellow Mechanical SealSize: 14 mm to 100 mm. Pressure: ≤1.6Mpa. linear velocity: ≤20m/s. Temperature: -40°C to +220°C.
-
MOR 102 Booster Pump Metal Bellow Mechanical SealSize: 16-100mm. Pressure:- 0.1 ~ 2.5 MPa. linear velocity: ≤15m/s. Temperature: - 40 ~ 200 ºC. Mediums: hot water, oil, liquid hydrocarbon, acid, alkali, solvents, paper pulp and other
-
Equivalent to Flowserve Durametallic X-200 Metal Bellows Mechanical SealSize: 25 mm – 150 mm (1 – 6). Pressure:Up to 41 bar (600 psi) (single seal); up to 27 bar (400 psi) (dual seal). linear velocity: ≤30m/s. Temperature: -200°C to +425°C (-328°F to +800°F)
-
MOR BXHHB BXH API mechanical sealSize: 21.8-127mm. Temperature: -73°C- 427°C. Pressure: ≤20.7 bar. Speed: ≤25 mps.
-
MOR MFLWT 80 Rotating Mechanical SealSize: 38~127mm(custom sizes available). Pressure: ≤25bar. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material-dependent).
-
MOR LBG Cartridge Metal Bellow SealSize: 25~100mm. Pressure: ≤2.5MPa. Linear velocity: ≤6000r/m. Temperature: -70°C to 400°CThis seal is mainly used for coal-fired power generation boiler feed water pump.
-
MOR EBU metal bellow mechanical sealSize: 25 mm – 100 mm (1 – 4). Pressure: ≤25bar. linear velocity: ≤50m/s. Temperature: -40°C to +425°C (-40°F to +800°F) (material‑dependent).
-
MOR 609 bellows shaft sealSize: 25–100 mm (custom sizes available). Pressure: 0-2.5MPa. linear velocity: ≤20m/s. Temperature: −50 °C to +425 °C (material‑dependent).
-
MOR JCS1 JCS1F Mechanical sealsSize: 30~100mm. Pressure: ≤16bar. linear velocity: ≤20m/s. Temperature: -20℃+120℃.
Metal Bellows Mechanical Seals Design Features 1. Wide service range from cryogenics to heat transfer liquids and corrosive chemicals. 2. Long service life—only one moving part. 3. Flexible bellows...
What is a Mechanical Seal, and What Goes Into the Design? The primary purpose of a mechanical seal is to separate air from fluids in rotating applications. Mechanical seals consist of a rotating...
Our innovative mechanical seals for pumps, agitators, mixers, and other rotating equipment simplify installation, improve reliability, and extend the performance of fluid handling....
GOETZE® Mechanical Face Seals, also known as metal face seals, are specifically engineered for rotating applications in extremely arduous environments where they withstand severe wear and prevent the...
The Chesterton 150 is a value leader in its class. It is the ideal single mechanical seal to reduce high maintenance costs and prevent wasteful leakage, shaft fretting damage, and inefficient...
Metal bellows are an excellent choice for aggressive applications that attack elastomers. They excel in extreme applications that ruin elastomers or make them ineffective: cryogenic and extreme high...
